depth finder for trolling motor on bay boat

[Crawl79]

Originally Posted by wishin i was fishin

if you are running a bow mount trolling motor, not an I Pilot, you can go with any stand alone unit. you can get interference between the two but i never noticed it on my older boat.

you can put a xtucer on an ipilot but you have to disassemble it.

i will be doing the same with a HDS 7 and 12 but i am going to network it so i only have 1 Xducer on the boat.

Ok I have an Ipilot. Why would I need to dissemble?

And could I network and elite 7 with an elite 3 or 4 to run off same xducer?

[marty f]

Originally Posted by Crawl79

Ok I have an Ipilot. Why would I need to dissemble?

And could I network and elite 7 with an elite 3 or 4 to run off same xducer?

nope cant network, I already explored this option, besides I like the transducer on the TM so I know when Im getting too skinny, seems kinda late when the front is running aground and the back transducer is still reading 2.5

[wishin i was fishin]

Originally Posted by Crawl79

Ok I have an Ipilot. Why would I need to dissemble?

And could I network and elite 7 with an elite 3 or 4 to run off same xducer?

HEre is a video on installing a transducer on a Ipilot.

https://www.youtube.com/watch?v=G54WQVtErZ0