SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   General Discussion (Everything Else) (http://www.saltycajun.com/forum/forumdisplay.php?f=2)
-   -   stick'em'rods (http://www.saltycajun.com/forum/showthread.php?t=62011)

Andy C 10-13-2015 03:28 PM

stick'em'rods
 
Are they still working?? Broke a " rod I won at the sc turnment last year, can't get ahold of them, dang 13" speck, I liked that rod!!

Anyone have any contact info for them other then the website?

"W" 10-13-2015 03:31 PM

Most small rod makers come as fast as they go

CAMP CANARD 10-13-2015 03:51 PM

Eye inserts fell out mine after a year. Moved on to Sarge to keep my blood pressure down and curtail my drinking.

Andy C 10-13-2015 04:46 PM

Quote:

Originally Posted by "W" (Post 775805)
Most small rod makers come as fast as they go

What I figured, but thought I would try.

Lake Chuck Duck 10-13-2015 07:34 PM

I believe the are still making the outcast reels. Can't say about the rods

Bluechip 10-13-2015 07:35 PM

They donated rods and reels for the tournament in August.

ChrisD 10-13-2015 07:46 PM

stick'em'rods
 
Quote:

Originally Posted by CAMP CANARD (Post 775809)
Eye inserts fell out mine after a year. Moved on to Sarge to keep my blood pressure down and curtail my drinking.


I have a sarge wingman paired with a core that I laid on the front deck yesterday while trying to net someone's fish ( which I never do ) I looked back and my rod goes flying over the side at 30 mph. I was just about to start crying and I see the rod floating about 20 yds in front the boat. I troll up to grab it and Ive still got an impressive gaftop on the other end. I get the beautiful specimen in the boat and beat her lifeless and continue on with my day.

I guess what I'm getting at is do all the sarge custom rods float or did I just get real lucky?

"W" 10-13-2015 07:59 PM

Quote:

Originally Posted by ChrisD (Post 775830)
I have a sarge wingman paired with a core that I laid on the front deck yesterday while trying to net someone's fish ( which I never do ) I looked back and my rod goes flying over the side at 30 mph. I was just about to start crying and I see the rod floating about 20 yds in from the boat. I troll up to grab it and Ive still got an impressive gaftop on the other end. I get the beautiful specimen in the boat and beat her lifeless and continue on with my day.

I guess what I'm getting at is do all the sarge custom rods float or did I just get real lucky?

They probably float

I know my core and Waterloo float

DaPointIsDaBomb 10-13-2015 08:13 PM

Quote:

Originally Posted by ChrisD (Post 775830)
I have a sarge wingman paired with a core that I laid on the front deck yesterday while trying to net someone's fish ( which I never do ) I looked back and my rod goes flying over the side at 30 mph. I was just about to start crying and I see the rod floating about 20 yds in front the boat. I troll up to grab it and Ive still got an impressive gaftop on the other end. I get the beautiful specimen in the boat and beat her lifeless and continue on with my day.

I guess what I'm getting at is do all the sarge custom rods float or did I just get real lucky?

You lucky it wasn't a helium rod. Friend and I were at weeks bay and he went to set the hook and rod fell out his hands. Look up and his rod and reel was floating up in the air with a gafftop in tow. Deer hunter found it in Lydia a few weeks later once it ran out of helium. Bear or coon got that gafftop

jl8200 10-13-2015 08:24 PM

They have a Facebook page, which has their contact info but I don't think they are managing it. There have been a couple of people posting on their page trying to get in touch with them and got no response. But hey, they have their address so maybe you could drive over there and raise some hell!

redaddiction 10-13-2015 08:37 PM

Quote:

Originally Posted by "W" (Post 775805)
Most small rod makers come as fast as they go

Yup! It can only be a hobby. Never will be a viable business unless you can mass produce and sell a crap load of rods. But then they are no longer "custom". Many have tried and many have failed.

Andy C 10-13-2015 09:34 PM

Quote:

Originally Posted by jl8200 (Post 775837)
They have a Facebook page, which has their contact info but I don't think they are managing it. There have been a couple of people posting on their page trying to get in touch with them and got no response. But hey, they have their address so maybe you could drive over there and raise some hell!

Yeah my buddy lives close by there so going to send it with him, would really be mad had I bought it and not won it at a sc event!!!! But still should not have broken third trip out with it, cause I take extra care with all my rods not to damage them in anyway

ckinchen 10-13-2015 09:46 PM

Paul Myers has a good relationship with them send him a pm

jl8200 10-14-2015 12:44 PM

This is why I buy all my rods at Academy. They take them back in pieces without a receipt.

redaddiction 10-14-2015 01:09 PM

Quote:

Originally Posted by jl8200 (Post 775870)
This is why I buy all my rods at Academy. They take them back in pieces without a receipt.


The mangers there shut me down everytime I've tried to return a rod. They even gave me a look like "are you kidding me dude!"

jl8200 10-14-2015 02:07 PM

I returned 2 this week after I laid them against my boat and ran over them when I forgot about them and pulled foreword.

bayouchub 10-14-2015 03:25 PM

Quote:

Originally Posted by jl8200 (Post 775878)
I returned 2 this week after I laid them against my boat and ran over them when I forgot about them and pulled foreword.

Thats probably a good part of the reason that some rod builders dont make it.

Bluechip 10-14-2015 03:46 PM

Quote:

Originally Posted by bayouchub (Post 775887)
Thats probably a good part of the reason that some rod builders dont make it.

X 2...

Duck Butter 10-14-2015 03:48 PM

Quote:

Originally Posted by jl8200 (Post 775878)
I returned 2 this week after I laid them against my boat and ran over them when I forgot about them and pulled foreword.

you are part of the problem

Natural Light Kid 10-14-2015 03:52 PM

Quote:

Originally Posted by Duck Butter (Post 775891)
you are part of the problem

Ditto


All times are GMT -5. The time now is 03:08 AM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted