SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   General Discussion (Everything Else) (http://www.saltycajun.com/forum/forumdisplay.php?f=2)
-   -   Fiber glass repair shop? (http://www.saltycajun.com/forum/showthread.php?t=44773)

alphaman 06-10-2013 11:27 AM

Fiber glass repair shop?
 
2 Attachment(s)
Looking for a fiber glass repair shop. In lafayette are lake charles. Boat will be at LAM. Just in cast minnkota gives me the shaft while replacing my trolling motor shaft on my boat. :mad:

Might get a few quotes to fix my hull

Thanks

sent from my Galaxy NOTE II

Finfeatherfur 06-10-2013 11:34 AM

Best guy around and he does insurance work!

Located behind North Gate Mall on Evergreen Street, ask for Lyle. Make sure you tell him Bryan Foti sent you. He will fix it and you will not be able to tell that incident happened!!!! Trust me, he has fixed more crap to my boats from stupid stuff than I care to remember!

Lyle Jordan 278-6532
A+ Fiberglass

I make oil 06-10-2013 11:35 AM

Ouch! :cry:

That didn't take long. ;). I've got a few gel coat scratches on my boat I plan on getting fixed after the season.(I'm sure I'll get more during the season too.). The research I've done has pointed me to Tri-Parish fiberglass in Covington. It's a ways to go but I hear they are good. Good luck with the warranty.

Finfeatherfur 06-10-2013 11:35 AM

By the way, mine needs to get over there for a boat/trailer/loading incident - so don't feel pregnant!

Finfeatherfur 06-10-2013 11:47 AM

Saw the picture of the troling motor, but didn't understand how that happened. Can you fill us in on how that shaft goes over the front of the boat at 55mph. Did it jump out due to rough chop? Your mount is different from my Riptide, so I want to make sure that doesn't happen to me!!!

alphaman 06-10-2013 12:18 PM

Wasnt going 55. It was about 40. We were in the intercoastal smooth as glass. Came across a small wake from a boat. One of those you cant see. Boat bounce off the wake. Then for some reason ( im guessing here) the movement foward and down force of the bow. Must have jared the release lever And the trolling motor unlocked slid foward down in the water at 40+ and snapped. I had the collar in place and it slid too.
Slow down and ran to the bow and shaft was just hanging on by some fiber and the wires.

Saw the gash when we put the boat on the trailer

Ive been in some ruff stuff and this never happened! Like last sat cca trout shoot out no problems. Sucks!!

sent from my Galaxy NOTE II

alphaman 06-10-2013 12:19 PM

1 Attachment(s)
sent from my Galaxy NOTE II

Dogface 06-10-2013 12:38 PM

Do yourself a favor and listen to fin feathers advice. Lyle is awesome and you will enjoy meeting him as well.

alphaman 06-10-2013 12:52 PM

I went see him on my lunch break. Cool guy. I will get with him if minnkota wont fix it

sent from my Galaxy NOTE II

Dogface 06-10-2013 01:15 PM

Quote:

Originally Posted by alphaman (Post 591792)
I went see him on my lunch break. Cool guy. I will get with him if minnkota wont fix it

sent from my Galaxy NOTE II

You might get minn Kota to let Lyle fix it for you and pay some if not all of the expense.

alphaman 06-10-2013 01:23 PM

Quote:

Originally Posted by Dogface (Post 591803)
You might get minn Kota to let Lyle fix it for you and pay some if not all of the expense.

Sounds good but We'll see how it goes.

sent from my Galaxy NOTE II

specktator 06-10-2013 04:02 PM

Yeh Lyle does great work. That sucks.

ragincajun 06-10-2013 04:12 PM

2 Attachment(s)
I'll third Lyle's work. I thought it was a little expensive but its not something I can do myself so I was willing to pay.

gasdad 06-10-2013 04:23 PM

Glass work
 
X10 vote for Lyle. He does awesome work.

T-TOP 06-10-2013 04:47 PM

Quote:

Originally Posted by Finfeatherfur (Post 591740)
Best guy around and he does insurance work!

Located behind North Gate Mall on Evergreen Street, ask for Lyle. Make sure you tell him Bryan Foti sent you. He will fix it and you will not be able to tell that incident happened!!!! Trust me, he has fixed more crap to my boats from stupid stuff than I care to remember!

Lyle Jordan 278-6532
A+ Fiberglass

You know Gerard and sherry Foti??

rk3 06-10-2013 04:52 PM

Quote:

Originally Posted by Finfeatherfur (Post 591740)
Best guy around and he does insurance work!

Located behind North Gate Mall on Evergreen Street, ask for Lyle. Make sure you tell him Bryan Foti sent you. He will fix it and you will not be able to tell that incident happened!!!! Trust me, he has fixed more crap to my boats from stupid stuff than I care to remember!

Lyle Jordan 278-6532
A+ Fiberglass

This guy is the best around. Agreed. Even see $250,000 boats there...not just a little place. He is truly an artist.

Montauk17 06-10-2013 05:05 PM

3 Attachment(s)
Lyle does good work....he rebuilt my whaler years ago did a great job. Added raised front deck new console glassed in leaning post with storage on each side and rear deck. Removed all of the rails too. Before and after pics..the after pics are 5 years after he did the work. Not bad for a 1970 model.

ScubaLatt 06-10-2013 07:11 PM

Max at Olmstede shipyard in Lake Charles does terrific work. Also takes insurance claims. I have had my boat there 2-3 times and always had good results.

getonfish 06-10-2013 10:49 PM

So who was driving the boat and in charge of the trolling motor when this happened?????




Sorry just couldn't help myself. :smokin:

alphaman 06-10-2013 10:53 PM

Quote:

Originally Posted by getonfish (Post 592160)
So who was driving the boat and in charge of the trolling motor when this happened?????




Sorry just couldn't help myself. :smokin:

Lol I guess It was just one of those days.:eek:

sent from my Galaxy NOTE II


All times are GMT -5. The time now is 06:24 AM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted