Salty Cajun Boats Show!!!

[BradleyPrejean87]

Originally Posted by swamp snorkler

Get some AlumaBrite, put it a spray bottle and spray it on there. Make sure your rinse your trailer really well, it can mess it up if it galvanized.

That is exactly what i was using! lol

[alphaman]

Its been a while since we saw some new and new you to you boats on the Salty Cajun Boat Show!!!! Lets see those New and New boats!!!!!!!!

Sent from my SAMSUNG-SGH-I317 using Tapatalk

[Elbert Chamblee]

21' Tx Triton 99 model boat 2010 200 Yamaha series 2 ...bought after I retired --new to me. HB 998. 2 lowrance df 510c & x88. No carpet rinse and store...floor shows blood, mud and dirt but cleans up easy. Goes faster than I can drive it. I just need to put on some depends and stay on the gas. Chinewalk above 65 mph gps. had speedo buried at 80 before I got gps. Top speed 72+

[Ratdog]

[Ratdog]

hatt comming ratdog
skiff lil rat

[Let um land]

New toy! 24-26 mph depending on water depth.

[bmatte8]

Originally Posted by mriguy

Very nice bmatte

Thanks!

[jldsc]

Originally Posted by Let um land

New toy! 24-26 mph depending on water depth.

Did anything to the motor yet? If not you wont regret if you do...I hate the factory briggs on these things...lil motor work and she will twice the animal!


Sent from an Apple Tree..

[Natural Light Kid]

Originally Posted by jldsc

Did anything to the motor yet? If not you wont regret if you do...I hate the factory briggs on these things...lil motor work and she will twice the animal!


Sent from an Apple Tree..

I have a "factory Briggs" on my prodrive except for bps exhaust and k&n air filter. Im not unhappy with it, but if more could be gotten out of it cheap and easy, I would be interested. Also, not interested in taking life off of the motor. Any suggestions?

[fishaholic82]

Add a cam and get your heads worked and you will see a major difference in your motor. I have the stage 1 mods on my gator tail and I would never run a stock motor. It's idles better and runs much better with more power. You won't be disappointed after doing a few ready mods. And as far as shortening the life of the motor, I know a few guys with over 500 hours on their motors after the mods. So as long as you don't go over board you should be fine.

[Natural Light Kid]

Does anyone around lake Charles do this kind of work?

[jldsc]

I don't know of anyone...Try Calens small engine or get with Hoyt at GatorTail...at least get the heads reworked....when I pulled mine off you could see daylight about 75% around each valve....Factory briggs is junk!!

[BuckingFastard]

Originally Posted by jldsc

I don't know of anyone...Try Calens small engine or get with Hoyt at GatorTail...at least get the heads reworked....when I pulled mine off you could see daylight about 75% around each valve....Factory briggs is junk!!

yep, we used to rebuild them... every one youd take apart was just put together where theyd "last" but they never ran like they should. if you had a car the was built like these, youd have to ride with the windows down cause it would stink so bad!

[fishaholic82]

I don't know of anyone near lake Charles but I would definitely recommend having gator tail do the mods. Give Hoyt a call and he can set you up right. They did my mods and I've Ben nothing but pleased. You won't regret it

[Quackhead62]

You can't go wrong with Calen he did my mods. I would bring another motor to him without a second thought.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[alphaman]

BUMP BUMP THE SALTY CAJUN BOAT SHOW IS BACK 2014 !!!! LETS SEE SOME MORE NEW, NEW TO ME BOATS!!!

[SLAB]

ImageUploadedByTapatalk1406953485.256586.jpgImageUploadedByTapatalk1406953501.987129.jpgImageUploadedByTapatalk1406953519.596398.jpgImageUploadedByTapatalk1406953542.993681.jpg

[dhebert307]

.

[dennissonnier]

2014 Tracker PT 190 w/ 90 Optimax

[fishfighter]

Originally Posted by dennissonnier

2014 Tracker PT 190 w/ 90 Optimax

hey dennis that chicot state park? you catch anything over there?