|
|
|
|
|||||||
| Boating Talk For discussion of everything related to boats and motors |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
11-25-2010, 10:17 PM
|
||||
|
||||
Kenner Scuppers
Anyone own or know of water entering through the transom scuppers on the Kenner Vision series boats? I get small amounts of water coming in through my scups when i have the boat in reverse...or have xtra weight/people in the back of the boat. No water enters when weight is equally distributed. Its not enough to make me nervous nor is it anything that wont drain once weight is shifted or boat is put in gear. I can't find much on this and know some of you have this type of boat. I find this somewhat annoying. Anyone have any suggestions....I like the idea of scuppers for draining but would rather it be only a drain hole.
|
|
#3
11-25-2010, 11:14 PM
|
||||
|
||||
|
rubber.....i take it the rabuds are the ping pong ball scups? what do ya think LA? is this normal of the rubber scups? should i just not pay any attention to it.........plug em up?.....
|
|
#5
11-25-2010, 11:46 PM
|
||||
|
||||
|
|
|
#6
11-25-2010, 11:45 PM
|
||||
|
||||
|
What do yo have them plugged off with? Is it a permanent plug? Please elaborate....
|
|
#7
11-27-2010, 01:11 AM
|
||||
|
||||
|
plugs
Quote:
|
|
#8
11-26-2010, 12:48 AM
|
||||
|
||||
|
I got a Kenner. I just haven regular boat plugs in mine cause the water comin in annoyed me
|
|
#9
11-26-2010, 01:18 AM
|
||||
|
||||
|
..I believe the rolled hulls have 4 different plugs along the back ......whether those are scuppers or not i cant recall but if they are they're alot smaller than these. In no way shape or form could my boat plug fill this scupper. this is a 3" hole i believe
|
|
#12
11-26-2010, 12:20 PM
|
||||
|
||||
|
Homerun: What are you plugging them with from the inside? Would you mind posting a pic? Where can you get these plugs?
Shaw: Your Blue Wave has 'em too? Do you get water coming in the back? I'm not sure what im gonna do yet....But from what i've read......get the ping pong scuppers that have the holes on the bottom and not the back....ex: scupper.jpg
|
|
#15
11-26-2010, 02:01 PM
|
|||
|
|||
|
isold mine 6 mths ago. sorry no picks. it is the same size plug that you use on your boat(the main one at bottom of boat at bottom of transom) just go buy 2 more and they will plug from inside of transom. opposite side of transom of scupper holes(outside). hope this helps. everytime i went fishing i had 3 plugs(1 for outside and 2 for the inside for the self bailing drains)
|
|
#16
11-26-2010, 03:18 PM
|
||||
|
||||
|
jchief.....where did you get the 1.5" plug? Name brand etc? THX
|
|
#20
11-26-2010, 10:31 PM
|
||||
|
||||
|
You can get rubber plumbing plugs at any harware store that act just like and look like a boat plug. Multiple diameters available.
|
|
| Bookmarks |
|
|
Hybrid Mode
