if you use the mighty mite anchor, get a piece of 2" pvc & cap. measure it to rest on the deck and extent a little higher than the gunnel so that some of the tines can hang over the gunnel. Cut a 1/2" slot along the length of the pvc. Glue the cap on one end. Place the holder with cap on the deck and holder leaning against the gunnel and front deck with slot facing away from deck. you can then mark your holes, drill and attach the holder to the deck thru the slot. Place 2 cleats on the inside of gunnel about 3' apart to loop your rope on. Had that setup for many years with no issues,
|