Quote:
Originally Posted by specktator
Yesterday after you guys told me about reset button, it worked. But it still kept trippin the reset every few minutes. I made sure connections were tight. Any other ideas besides pulling it off and setting it on fire?
|
Another thing to check......is the wire. The salt water gets up inside the wires where the wire is exposed at connections. You might have to cut the wire at each connection. Cut off the end of the wire [1" to 3"] until you see "good" looking wire.
Or.....there could be a "bad" or partically "broken" wire due to vibration or wire being pinched. I found this problem on my boat not long ago.