-
Boating Talk
(
http://www.saltycajun.com/forum/forumdisplay.php?f=28)
| Nasty |
06-01-2011 04:52 PM |
Bearings for trailer...
All bearings for trailers are made the same... right? Is there any brand bearing better than another?
|
| Montauk17 |
06-01-2011 04:56 PM |
Not all bearings are the same quality....timken is the best. If you live around lafayette area go to bearing supply on jefferson st. Just bring your inner and outer bearing and they will match it up. You will probably need change the hub seal as well.
|
| Nasty |
06-01-2011 05:03 PM |
Do they make a tool to get the racer out easier than using a screwdriver and hammer?
|
| Montauk17 |
06-01-2011 05:10 PM |
Quote:
Originally Posted by Nasty
(Post 261031)
Do they make a tool to get the racer out easier than using a screwdriver and hammer?
|
Yeah they do,but the pullers are very expensive. Snap on is the only one that is decent and it is around 300 bucks. Try using a decent sized punch or chisel. |
| Nasty |
06-01-2011 05:24 PM |
Thanks Montauk!
|
| Sea-Trac Offshore |
06-01-2011 05:24 PM |
If you change the bearings change the race as well as if the bearing is damaged the race will be too
|
| Montauk17 |
06-01-2011 05:30 PM |
Sho nuff
|
| Nasty |
06-01-2011 05:32 PM |
10 4!
|
| Jordan |
06-01-2011 05:47 PM |
Good job guys, well done !!!!!
|
| All times are GMT -5. The time now is 06:31 PM. |
|
Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted