SaltyCajun.com

SaltyCajun.com (http://www.saltycajun.com/forum/index.php)
-   Boating Talk (http://www.saltycajun.com/forum/forumdisplay.php?f=28)
-   -   Grinding Noise When Shifting into Gear (http://www.saltycajun.com/forum/showthread.php?t=44771)

Montauk17 06-10-2013 09:05 PM

His number is 337-781-3411

Gerald 06-11-2013 03:29 PM

2 Attachment(s)
Here is what badly worn gears look like. There gears are from a 40 hp engine. The engine was still running but had started to make a lot of noise on the last trip out. The noise had started a few trips before I took the lower unit apart.

In my case.....the parts for a complete overhaul looked to cost about $ 1000. I might have gotten by for $ 7-800 worth of parts, if I did not replace a few internal parts.

The main problem I saw in doing the work myself was the lower drive shaft gear instalation. This gear has a spring behind it and it must be compressed to get the nut installed [see second picture]. Looked like it took some kind of special tool to do this, so I would have to have some shop do this for me.

I ended up finding a complete lower unit that was in very good condition [only ran in fresh water] that cost me $ 700 delivered. I ran that engine a couple years before selling the boat.

Montauk17 06-11-2013 04:50 PM

Check this site out,I have installed several of them and no trouble so far. They have a 3 year no fault warranty on them. http://www.sterndrive.cc/index.htm


All times are GMT -5. The time now is 05:30 AM.

Powered by vBulletin®
Copyright ©2000 - [ARG:3 UNDEFINED], Jelsoft Enterprises Ltd.
vB.Sponsors
All content, images, designs, and logos are Copyright © 2009-2012,
Salty Cajun, LLC
No unathorized use is permitted